Larger concrete jobs are subbed out for cost effectiveness. For smaller foundations, such as footings, or shed slabs, we take care of this ourselves. The area is marked and prepared where the slab/footing will be, and then dug or leveled to accommodate.
1 of 4
If pouring a footing for posts, dig a hole that is 3’-6’ deep by 12”-18” wide. Ensure that your post is plumb on all sides, and pour concrete in the hole around the post to secure. Brace where necessary to maintain plumb while concrete cures.
2 of 4
For shed slabs, create a form using 2x6 lumber. The area where the slab will ultimately be, should be prepared to accommodate the slab, factoring in elevation, and placement of form. Place the form, ensure that it is level, and secure with stakes. Screw stakes to form to secure. Pour concrete, and screed using a 2x4 long enough to overlap the longest dimension by at least 2’ on each side. Float with a magnesium float first, and then steel last, making sure to use a concrete edger in between steps.
3 of 4
When pouring new concrete that will be tied into existing, clean the surface of the existing concrete and apply concrete bonding adhesive first.
